Magnetic Contact Switches

Magnetic contact switch (door sensor)
เซนเซอร์แม่เหล็ก เหมาะสำหรับประตู - หน้าต่าง 

This sensor is essentially a reed switch, encased in an ABS plastic shell. Normally the reed is 'open' (no connection between the two wires). The other half is a magnet. When the magnet is less than 13mm (0.5") away, the reed switch closes. They're often used to detect when a door or drawer is open, which is why they have mounting tabs and screws. You can also pick up some double-sided foam tape from a hardware store to mount these, that works well without needing screws.

 

 


  • BR-1011.png
    BR-1011 :Recessed Mounted * 3/8" diameter Super Miniature Stubby switch* Press to fit* Standard 18" #22AWG Leads* Switch or magnet are available separately* Special leads available...

  • BR-1012.png
    BR-1012 : Recessed Mounted * 3/8" diameter miniature flush mounted* Press to fit* Standard 18" #22AWG Leads* Special leads upon request* Switch or magnet are available separately* ...

  • BS-2011.png
    BS-2011 :Surface Mounted * Mini Stick-on contact with flange* Side leads with #22AWG 18" length* Adhesive and screw mount included* Special leads on request* Switches or magnets av...

  • BS-2031.png
    BS-2031 :Surface Mounted * Screw mount Concealed terminals* Spacers, cover and screws included* Switches or magnets available seperately* Resistor, Diode and Supervisory Loop avail...

  • BS-2071AR.png
    BS-2071AR :Surface Mounted * Metal magnetic contacts* Ideal for commercial application or industrial use* Screws included* Standard 18" #22AWG leads* 2 Conductor jacket cable on re...

  • BSD-3013.png
    BSD-3013 :Overhead Door Contact * Miniature floor mount* Universal magnet for flexibility in mounting* Extude aluminum casings for harsh environments* Wire: #22AWG with 22" armored...

แบบฟอร์มติดต่อกลับ

Visitors: 154,355